SGS Certificated 1.5mm Metal Spinning Parts Aluminum Lamp Cover

1.5mm Thickness Aluminum Metal Spinning Parts Aluminum Spinning Industrial Lamp Cover

CNC metal spinning parts

Metal rotation or rotational forming is the process of moving a rotating roller on a metal blank. The metal rotation process begins with a sheet metal blank rotating on a lathe. The metal disc is pressed on a tool (called a spindle or chuck) with a tailstock. The metal disc, the tailstock and the tool rotate in a circular motion. The roller controlled by the CNC presses against the metal, and the metal is formed above the tool through a series of strokes of the roller. The resulting part is a part that duplicates the exterior of its forming tool.

The basic shapes of metal spinning are cone, flange, hemisphere, cylindrical shell, venturi and parabolic nose. When it is desired to minimize the mold cost and the part volume is low enough, metal spinning is an ideal process, and the unit cost will not offset the mold savings. In some cases, metal spinning is the preferred method due to the complex geometry of the part. yonglihao uses CNC technology to develop programs for your parts so that the programs can be executed repeatedly.

Metal spinning parts parameters

Introduction of metal spinning parts process:

The metal spinning parts process (also known as "metal turning" or "spin forming") refers to the basic manufacturing process in which a flat metal disk (rough) is fixed in a spinning lathe to form Hollow parts. section. When the blank rotates, the roller tool presses it against the chuck mandrel to form the blank, and then copies the internal shape of the part. The result is a precisely shaped workpiece with a compressed grain structure and a smooth surface, and in many cases, no further finishing steps are required.